With BW 160 Mud Pump Hydraulic GK 200 Trailer Mounted Drilling Rigs
GK 200 Trailer Mounted Drilling Rigs Introduction:
This is an easy movement and portable drilling rig ,very suitable for personal use ,Gk200 drilling rig is with a depth 200 meters ,and hole diameter is from 75mm-300mm.·wheeled walking mechanism, very convenient for transport and adjusting the drilling rig level. ·pressure gauge display the condition of the bottom of the drill hole. ·the drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. ·the working efficiency is high and the operation is convenient, safe and reliable.
GK 200 Trailer Mounted Drilling Rigs Technical Data:
| GK 200 Drilling Rig Model |
| Drilling hole diameter(mm) | 75,91,110,130,150,300 |
| Drilling depth (m) | 200,150,100,70,50,30 |
| Drill pipe diameter (mm) | 42,50 |
| Drilling angle(°) | 90~75 |
| Equipment size(L * B * H) | 1730 * 860 * 1360 (mm) |
| Rig weight (except engine) | 700 |
| Gyrator |
| Spindle speed (four gear) (r/min) | 115,230,505,1010 |
| Spindle travel(mm) | 450 |
| Spindle no-load lifting maximum moving speed(m/s) | 0.05 |
| Spindle no load drop maximum movement speed(m/s) | 0.067 |
| Spindle maximum feed pressure(KN) | 15 |
| Spindle maximum lifting force(KN) | 25 |
| Spindle maximum output torque(KN• m) | 1.5 |
GK 200 Trailer Mounted Drilling Rigs Features
1.Engine:Feed by hydraulic cylinder,the drilling efficiency is higher and it can save labor.
2.Drill rod:53x59 drilling rod adopted,high rigidity and strong delivery torque.
3.Spindle:Vertical spindle are fixed by four groups of bearing to ensure that the rotary machine is rigid enough for gravel layer and other complex geoloical conditions.
4.Mud pump:Equip mud pump with flow 160L/min,save cost and also make the structure compact.
5.Concentrated handle, small footprint,light weight, strong decomposition, easy to move.
GK 200 Trailer Mounted Drilling Rigs
It is suitable for geological survey, geological core drilling, small grouting holes, blasting holes and small water well holes of railway, water conservancy, bridge, dam foundation and other buildings.
The five main types of wells are digging, driving, drilling, drilling and jetting (Flushing).
Most digging and drilling equipment is available, or because drilling is considered too expensive, the front hole is built-in. Modern wells are usually lined with concrete tiles and have a large diameter, providing a large opening for the aquifer. This allows them to get water from very fine materials such as sand, silt or clay. The wells are shallow and there is no continuous casing, which makes them polluted by nearby pollution sources.
Drive wells are made by driving small diameter pipes into shallow water, sand or gravel containing sand. The construction of these wells is relatively simple and economical, but they can only dig shallow water and are as easy to be polluted as digging wells.
The drilled well consists of a large auger. The depth of boreholes is usually about 50 to 70 feet. They are usually made of soft materials, such as sand, silt, clay and soft rock.
Product Tags:
|
|
Exploration Engineering Trailer Mounted Water Well Drilling Rigs Hydraulic Gk 200 Images
|
